"Blue Technologies", unites the key elements of successful manufacturing to provide a competitive advantage to manufacturers around the globe. A wide range of products, support services and knowledge are brought to you from a single source, a company you can trust -CINCINNATI.

With a comprehensive product line-up of Vertical Machining Centers, Horizontal Machining Centers, CNC vertical machining centers and Vertical & Horizontal Turning Centers,CINCINNATI offers a wide range of specification, to provide a solution for every requirement. Higher productivity, better quality and lower cost per piece are the end result.

Cincinnati is the leading manufacturer of Standard Series VMCs with an installed base of over 30,000 machines. These VMCs feature box way construction for the X, Y & Z-axis slide motion. A choice of X-axis ranges and spindle powers are available to meet both capacity and performance requirements. Positioning accuracy ±0.005mm &repeatability ±0.0025mm. Value added options available.

Performance VMCs can be pushed to deliver high tolerance parts. Larger casting with wider & thicker box ways increase vibration dampening allowing the Cincinnati 10,000 rpm spindle to be pushed even harder than usual. Positioning accuracy ± 0.004mm and repeatability ±0.0015mm. Value added options available.

Available in table sizes of 700 x 520mm & 950 x 520mm. Fanuc 21i-MB controller with Manual Guide (i) software is provided,so the operators spend more time machining than learning complex CNC systems. machine is equipped with LM Guides, pre-programmable acc/dec and cylindrical Interpolation for optimum contouring speed and accuracy.Automatic swarf extraction is standard. Value added options available.Positioning accuracy ±0.005mm & Repeatability ±0.0025mm.

Available in table sizes 700 x 520mm, 950 x 520mm, 1120 x 600 mm and 1370 x 600 mm. High precision 3, 4 & 5-Axis VMCs with high rigidity cast structure, LM guides & superior operating efficiency.Three spindle options available - CFVi for Precision Machining, CFV Xi for high volume & CFV Si for Die & Mould and Aerospace applications.Positioning accuracy (X &Y/Z : ±0.003/0.004) and Repeatability ±0.001mm.Linear scales are standard in X & Y axis for CFVi & CFV Xi and also in Z axis for CFV Si.

CFV5 - 5 Axis VMC has a fully integrated high capacity 5-axis trunnion table for 5-sided and simultaneous machining. Table load capacity is 100kg and 350 face plate enables parts of 400mm dia and 300mm high to be comfortably machined.

CFV5 – 5 Axis VMC has a fully integrated high capacity 5 –axis trunnion table for 5-sided and simultaneous machining. Table load capacity is 100kg and 350 face plate enables parts of 400mm dia and 300mm high to be comfortably machined.

Available in table sizes (Width x Length)mm : 635 x 1720/ 2330 / 3040 815 x 1820 / 2430 / 3140 / 4300, 1005 x 2430 / 3140 / 4300.In-cycle loading is offered on 3 & 4 Axis FTVs – no more palletshuttles. Capacity of work loads up to 10,000 kgs. Linear scales standard on X, Y & Z Axis. Positioning accuracy (X/ Y&Z : ±0.004/0.003) and Repeatability ±0.001mm

FTV-5 is the next generation of 5-axis machining, with integral 5 Axis spindle, versatile enough to handle the demanding needs of aerospace die/mould, heavy equipment and job shop applications.

Bluestar horizontal machining centers are available in three models with a choice of 500 or 630mm pallet sizes and up to 900mm Z axis, complimented with a choice of spindles. These provide high value solutions at low capital outlay for high precision horizontal machining.Integrated scales in linear guide ways are standard.

The Blueturn range of inverted spindle vertical turning centers provide new standards in vertical turning. Short tool change times,high standard specification, a fast spindle and a large capacity for work pieces up to 30kg in weight and up to 450 mm in dia help to turn more parts more quickly. An automatic conveyor system can be specified with the blueturn for even greater productivity and unmanned running.

NEW PRODUCT RANGE BEING LAUNCHED SOON !!!