| Spindle Diameter | $130 | mm |
| Spindle Taper | DIN 69871 | ISO 50 |
| Spindle RPM | 10 3 000 | rpm |
| Maximum Spindle Torque (S1 Continuous) | 2 000 | Nm |
| Headstock dimension | 400 x 400 | mm |
| Spindle Motor Power (S1 Continuous) | 37 | kW |
| Table travel (X-axis) | 2400 - 6100 | mm |
| Headstock travel (Y-axis) | 2500 - 3500 | mm |
| Column travel (Z-axis) | 2100 - 3900 | mm |
| Spindle Travel (W-axis) | 730 | mm |
| Ram travel (V-axis) | 900 | mm |
| Operation traverse all axis | 1 – 8000 | mm/min |
| Rapid traverse X-axis, Y-axis, Z-axis | 1 - 15 000 | mm/min |
| Rapid traverse V-axis, W-axis | 1 - 10 000 | mm/min |
| Rapid traverse B-axis | 1.8 | rpm |
| Max. traverse force X-axis, Y-axis, Z-axis | 25 | kN |
| Max. traverse force V-axis, W-axis | 30 | kN |
| Positioning Accuracy X, Y, Z, W | ±0.01 | mm |
| Repeatable Positioning Accuracy X, Y, Z, W | ±0.005 | mm |
| Table Dimension | 2000 x 2000, 2000 x 2500, 2000 x 3000, 2500 x 3000 | mm |
| T-slots - size | 28 H8 160 | mm mm 13 |
| Max. table load | 25 000 | kg |
| Tool unclamping pression | 10-15 | MPa |
| Ancillary circuit pressure | 8 | MPa |
| Tool clamping force | 25 | kN |
| Tool clamping | hydromechanic | |
| Incoming air pressure | 0,6 | MPa |
| Volume of incoming air (tool cooling) | 400 | l/min |
| Low pressure cooling – max. incoming volume | 50 | l/min |
| Low pressure cooling – coolant pressure | 4 | bar |
| Low pressure cooling – coolant tank | 2000 | l |
| Maximum power consumption | 115 | kVA |
© Essenes Machine Tools Private Limited . All Rights Reserved (Terms of Use)
